Waffle AK-74M/101 Magazine (30rd): Laffs Dynamics

Waffle patterned 3DP dual caliber AK platform magazine, for use in AKs chambered in 5.45x39, or 5.56x45 NATO. Caliber changes are 

quick via swapping out the follower. Floorplate, baseplate, locking tab, and magazine body are the same between calibers. 

Has the same strong separately printed locking tab used in the ProxyMag, Waco Waffle, and Slabslav series of Laffs Dynamics AK magazines. 

Weapons Tested In: 

1x WBP Mini Jack 5.56 AK Pistol (Polish Import)

1x PSAK-74 AK Rifle (American Production)

Basic Print Settings:

Filament Used: PLA+

Print Settings:

Extruder: 218C - 220C

Bed: 56C - 60C

First Layer Print Height: .2mm 

Standard Layer Height: .16mm (.12mm for the Follower & Locking Tab)

Wall Thickness: .40 

Wall Perimeters: 8

Infill: 80%+

Support Material Percentage: 18%

Hardware: 

1x Original AK-74 mag spring, Beryl mag spring, or listed compatible mag spring. (See Notes)

Epoxy or Clear Gorilla Glue

Parts Installation:

1) Apply cyanoacrylate adhesive inside the pocket for the rear locking lug. If the rear locking lug is slightly loose 

in the pocket, apply Clear Gorilla Glue. Wait 24hrs for the adhesive to cure. 

2) Insert the rear locking lug, with the angled facet facing outwards, and down towards the mag body's base. 

3) Lightly sand the anti-friction follower's sides and curved spine. 

4) Slide the top of the magazine spring through the front of the follower, above the spring retention tab.

5) Attach the floorplate to the bottom of the magazine spring, making sure the first spring winding snaps over the 

retainers. 

6) Slide the internal spring assembly into the magazine body.

7) Depress the floorplate, and slide on the baseplate. The floorplate's locking tab must index with the channel in the 

baseplate. 

Notes: 

1) Polish Beryl, WBP- 5.56/223, Promag AK-74, and Wolff mag springs are compatible with this magazine.