FBS-4 (AKM) V1.0.1
about
Fixed stock for AKMs, designed to mimic the aesthetics and feel of original RPK LMG buttstocks.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
Accreditations:
RK Spookware: Requested the design. Gave design parameters. Printed then test fitted the buttstock onto their AKM pattern rifle.
files
| File | Extension |
|---|---|
| FBS-4 (AKM) V1.0.1.zip | zip |
versions
Version: FBS-4 (AKM) V1.0.1 latest
FBS-4 (AKM) V1.0.1: Laffs Dynamics
Fixed stock for AKMs, designed to mimic the aesthetics and feel of original RPK LMG buttstocks.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
Accreditations:
RK Spookware: Requested the design. Gave design parameters. Printed then test fitted the buttstock onto their AKM pattern
rifle.
Version: 1.0.0
Initial release
about
Fixed stock for AKMs, designed to mimic the aesthetics and feel of original RPK LMG buttstocks.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
Accreditations:
RK Spookware: Requested the design. Gave design parameters. Printed then test fitted the buttstock onto their AKM pattern rifle.
creator
Metrics
Views
1.5K
Downloads
162
Project Info
release date
Jun 07, 2023
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| FBS-4 (AKM) V1.0.1.zip | zip |
versions
Version: FBS-4 (AKM) V1.0.1 latest
FBS-4 (AKM) V1.0.1: Laffs Dynamics
Fixed stock for AKMs, designed to mimic the aesthetics and feel of original RPK LMG buttstocks.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
Accreditations:
RK Spookware: Requested the design. Gave design parameters. Printed then test fitted the buttstock onto their AKM pattern
rifle.
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
