Evo Curved Waffle Mag (20): Laffs Dynamics
A classic, curved geometry variant of the Smol Waffle Stick Mag (See Notes) for the CZ Scorpion Evo 3.
For people that love the waffle mag texture, but wanted a normal 9mm curved mag feel.
Uses the exact same internals as the following magazine designs:
*BEEG Waffle Stick Mag
*GoldCorp Evo Mag 30
*Scaffold Stick Mag
*Smol Waffle Stick Mag
The magazine is compatible with mag springs from:
*Sig Sauer P320 17rd mags
*OEM CZ Scorpion Evo 3 20rd mags
*Aftermarket CZ Scorpion Evo 3 springs (See Notes)
*Beretta 92 Series 15rd mags
*Magpul PMAG GL9 15rd mags
*Magpul PMAG GL9 17rd mags
*Magpul PMAG GL9 21rd mags
*Magpul PMAG GL9 27rd mags (Damn that was surprising)
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 75%+
Support Material Percentage: 20%
Notes:
1) Aftermarket mag springs can be purchased from: https://czcustom.com/cz-parts-all/cz-springs-all/evo-mag-ext-spring.html
2) The straight Smol Waffle Stick Mag can be found here: https://defcad.com/library/bc5aa068-0cd3-42ee-83d6-cf190bef75ed/
Hardware Needed:
1x 20rd Scorpion Evo Mag Spring
File | Extension |
---|---|
Evo Curved Waffle Mag (20).zip | zip |
Version: 1.0.0 latest
initial upload
Evo Curved Waffle Mag (20): Laffs Dynamics
A classic, curved geometry variant of the Smol Waffle Stick Mag (See Notes) for the CZ Scorpion Evo 3.
For people that love the waffle mag texture, but wanted a normal 9mm curved mag feel.
Uses the exact same internals as the following magazine designs:
*BEEG Waffle Stick Mag
*GoldCorp Evo Mag 30
*Scaffold Stick Mag
*Smol Waffle Stick Mag
The magazine is compatible with mag springs from:
*Sig Sauer P320 17rd mags
*OEM CZ Scorpion Evo 3 20rd mags
*Aftermarket CZ Scorpion Evo 3 springs (See Notes)
*Beretta 92 Series 15rd mags
*Magpul PMAG GL9 15rd mags
*Magpul PMAG GL9 17rd mags
*Magpul PMAG GL9 21rd mags
*Magpul PMAG GL9 27rd mags (Damn that was surprising)
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 75%+
Support Material Percentage: 20%
Notes:
1) Aftermarket mag springs can be purchased from: https://czcustom.com/cz-parts-all/cz-springs-all/evo-mag-ext-spring.html
2) The straight Smol Waffle Stick Mag can be found here: https://defcad.com/library/bc5aa068-0cd3-42ee-83d6-cf190bef75ed/
Hardware Needed:
1x 20rd Scorpion Evo Mag Spring
1.1K
105
Feb 07, 2024
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
Evo Curved Waffle Mag (20).zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.