Evo Picatinny AFG V1.1: FFFTech/FFFTechnology
An angled foregrip designed specifically to match up to the OEM CZ Scorpion Evo III Pistol/SMG handguard. Utilizes the entire bottom picatinny rail on the handguard. Has front and rear hand stops, also has ridges that wrap around the AFG.
(Can be used on other weapon picatinny handguards)
Update V1.1: Enlarged picatinny rail channel for better fitment.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 54C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
File | Extension |
---|---|
Evo Picatinny AFG V1.2.1.zip | zip |
Version: Evo Picatinny AFG V1.2.1 latest
Evo Picatinny AFG V1.2.1: Laffs Dynamics
An angled foregrip designed specifically to match up to the OEM CZ Scorpion Evo III Pistol/SMG handguard. Utilizes the entire bottom picatinny rail on the handguard. Has front and rear hand stops, also has ridges that wrap around the AFG.
(Can be used on other weapon picatinny handguards)
Update V1.2.1: Tightened picatinny rail slot tolerances. Thickened handstops ends by 2mm. Relabeled designer's brand.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 54C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
Version: 1.0.0
Evo Picatinny AFG V1.1: FFFTech/FFFTechnology
An angled foregrip designed specifically to match up to the OEM CZ Scorpion Evo III Pistol/SMG handguard. Utilizes the entire bottom picatinny rail on the handguard. Has front and rear hand stops, also has ridges that wrap around the AFG.
(Can be used on other weapon picatinny handguards)
Update V1.1: Enlarged picatinny rail channel for better fitment.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 54C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
2.8K
Oct 17, 2022
3D Printer
United States
English
File | Extension |
---|---|
Evo Picatinny AFG V1.2.1.zip | zip |
Version: Evo Picatinny AFG V1.2.1 latest
Evo Picatinny AFG V1.2.1: Laffs Dynamics
An angled foregrip designed specifically to match up to the OEM CZ Scorpion Evo III Pistol/SMG handguard. Utilizes the entire bottom picatinny rail on the handguard. Has front and rear hand stops, also has ridges that wrap around the AFG.
(Can be used on other weapon picatinny handguards)
Update V1.2.1: Tightened picatinny rail slot tolerances. Thickened handstops ends by 2mm. Relabeled designer's brand.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 54C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
Version: 1.0.0
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.