These are the printed parts for a 26.5mm or 12 ga flare launcher
Additional parts needed
Also recommended is an aluminum 26.5mm to 12 ga flare adapter to prevent melting or burning the bore.
File | Extension |
---|---|
plunger.stl | stl |
latch.stl | stl |
impTokReceiver.stl | stl |
dustCover.stl | stl |
chargingHandle.stl | stl |
bolt.stl | stl |
README.txt | txt |
265to12gaugeBBL.stl | stl |
Version: 1.0.0 latest
These are the printed parts for a 26.5mm or 12 ga flare launcher
Additional parts needed
Also recommended is an aluminum 26.5mm to 12 ga flare adapter to prevent melting or burning the bore.
3.6K
362
Mar 05, 2022
3D Printer
English
No license
QmccNjEYZd6cMJchg6ZMZGyG4bvBScYaUG89hLB6JWrAf3
File | Extension |
---|---|
plunger.stl | stl |
latch.stl | stl |
impTokReceiver.stl | stl |
dustCover.stl | stl |
chargingHandle.stl | stl |
bolt.stl | stl |
README.txt | txt |
265to12gaugeBBL.stl | stl |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.