"Tyrannicide" Push Daggers: FFFTech/FFFTechnology
An offset T-handle push dagger with an angular, barbed blade.
Comes in two variants:
*Standard
*XL
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Their rule always comes to an end, one way or another...
File | Extension |
---|---|
Tyrannicide Push Dagger V1.1.2.zip | zip |
Version: "Tyrannicide" Push Daggers V1.1.2 latest
"Tyrannicide" Push Daggers V1.1.2: Laffs Dynamics
An offset T-handle push dagger with an angular, barbed blade.
Comes in two variants:
*Standard
*XL
Update V1.1.2: Fixed bugged mesh file. Updated print settings for better strength.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 50%+
Their rule always comes to an end, one way or another...
Version: 1.0.1
Latest update
Version: 1.0.0
Initial release
"Tyrannicide" Push Daggers: FFFTech/FFFTechnology
An offset T-handle push dagger with an angular, barbed blade.
Comes in two variants:
*Standard
*XL
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Their rule always comes to an end, one way or another...
5.3K
Jan 04, 2023
3D Printer
United States
English
File | Extension |
---|---|
Tyrannicide Push Dagger V1.1.2.zip | zip |
Version: "Tyrannicide" Push Daggers V1.1.2 latest
"Tyrannicide" Push Daggers V1.1.2: Laffs Dynamics
An offset T-handle push dagger with an angular, barbed blade.
Comes in two variants:
*Standard
*XL
Update V1.1.2: Fixed bugged mesh file. Updated print settings for better strength.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 50%+
Their rule always comes to an end, one way or another...
Version: 1.0.1
Latest update
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.