PM-DTA Grips (AR-15)
about
PM-DTA Grips (AR-15): FFFTech/FFFTechnology
This grip got a BIG BUTT, a thiCC Thumper, a HUUUUUUUUGE ASS! Good GAWD!
This is the Pixar Mom Dump Truck Ass Grip!
Has a swept backstrap, with a concave frontal section. But(t) those aren't the *biggest* features. The grip starts from the top at 22.3mm wide, and swells near its fat a- heel... to 29.3mm! *Oh lawdy...*
Comes in two variants:
*Standard
*Ridged
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100.25%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
files
| File | Extension |
|---|---|
| PM-DTA Grips V1.0.1.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
PM-DTA Grips (AR-15): FFFTech/FFFTechnology
This grip got a BIG BUTT, a thiCC Thumper, a HUUUUUUUUGE ASS! Good GAWD!
This is the Pixar Mom Dump Truck Ass Grip!
Has a swept backstrap, with a concave frontal section. But(t) those aren't the *biggest* features. The grip starts from the top at 22.3mm wide, and swells near its fat a- heel... to 29.3mm! *Oh lawdy...*
Comes in two variants:
*Standard
*Ridged
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100.25%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
creator
Metrics
Views
1.3K
Project Info
release date
Mar 20, 2022
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
version hash
Qma8MsYN7S5ZUjryKCeTH44rw3gPeUuF4FKHS869e1EuZJ
files
| File | Extension |
|---|---|
| PM-DTA Grips V1.0.1.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
