FBS-1 (3DP90): Laffs Dynamics
Variant of the AWCY? 3DP90 buttstock. Rear section is concave with ridges to avoid slippage.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 50%+
Support Material Percentage: 18%
Notes:
This file pack is for the buttstock only. Other printed part files will need to be downloaded from the base design release;
links provided in the below text.
Base 3DP90 files can be found on Odysee:
Odysee: https://odysee.com/@AreWeCoolYet:7/AWCY-Presents--The-3DP90:c
(Other print settings and the hardware list will be provided in the base data pack)
Accreditations:
V8vtwin, Lulzgoat, AWCY?; Creators of the base 3DP90 PDW design, of which this was made from.
File | Extension |
---|---|
FBS-1 (3DP90).zip | zip |
Version: 1.0.0 latest
initial upload
FBS-1 (3DP90): Laffs Dynamics
Variant of the AWCY? 3DP90 buttstock. Rear section is concave with ridges to avoid slippage.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 50%+
Support Material Percentage: 18%
Notes:
This file pack is for the buttstock only. Other printed part files will need to be downloaded from the base design release;
links provided in the below text.
Base 3DP90 files can be found on Odysee:
Odysee: https://odysee.com/@AreWeCoolYet:7/AWCY-Presents--The-3DP90:c
(Other print settings and the hardware list will be provided in the base data pack)
Accreditations:
V8vtwin, Lulzgoat, AWCY?; Creators of the base 3DP90 PDW design, of which this was made from.
1.2K
167
May 24, 2023
CAD Object, Stereolithic object
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
FBS-1 (3DP90).zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.