FBS-1 (MP5): Laffs Dynamics
A traditional styled fixed stock for H&K (Or licensed variants) MP5 SMGs and pistols, and pistol caliber carbines.
Slightly shorter LOP compared to the OEM stock for better use with body armor or heavier clothing.
Tested with:
1x Pakistan Ordnance POF-5 Pistol
1x MKE AP5
(May require slight hand fitment due to MP5 licensed manufacturers using older tooling for their model variants)
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .14mm+
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 50%+
Support Material Percentage: 18%
Hardware Required:
1x Choate MP5 Stock Buffer
1x M5x15mm Bolt
2x M3x12mm Bolts
File | Extension |
---|---|
FBS-1 (MP5).zip | zip |
Version: 1.0.0 latest
initial upload
FBS-1 (MP5): Laffs Dynamics
A traditional styled fixed stock for H&K (Or licensed variants) MP5 SMGs and pistols, and pistol caliber carbines.
Slightly shorter LOP compared to the OEM stock for better use with body armor or heavier clothing.
Tested with:
1x Pakistan Ordnance POF-5 Pistol
1x MKE AP5
(May require slight hand fitment due to MP5 licensed manufacturers using older tooling for their model variants)
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .14mm+
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 50%+
Support Material Percentage: 18%
Hardware Required:
1x Choate MP5 Stock Buffer
1x M5x15mm Bolt
2x M3x12mm Bolts
596
38
Feb 23, 2024
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
FBS-1 (MP5).zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.