FBS-4-QD (AKM) V1.0.2: Laffs Dynamics
Fixed stock for AKMs, designed to mimic the aesthetics and feel of original FBS-4 (AKM). Has four QD sling sockets.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 32%+
Support Material Percentage: 18%
Accreditations:
RK Spookware: Requested the design. Gave design parameters. Printed then test fitted the buttstock onto their AKM pattern
rifle.
File | Extension |
---|---|
FBS-4-QD (AKM) V1.0.2.zip | zip |
Version: FBS-4-QD (AKM) V1.0.2 latest
Fixed stock for AKMs, designed to mimic the aesthetics and feel of original FBS-4 (AKM). Has four QD sling sockets.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 32%+
Support Material Percentage: 18%
Accreditations:
RK Spookware: Requested the design. Gave design parameters. Printed then test fitted the buttstock onto their AKM pattern rifle.
Version: FBS-4-QD (AKM) V1.0.1
FBS-4-QD (AKM) V1.0.1: Laffs Dynamics
Fixed stock for AKMs, designed to mimic the aesthetics and feel of original FBS-4-QD (AKM) V1.0.1. Has four QD sling sockets.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 32%+
Support Material Percentage: 18%
Accreditations:
RK Spookware: Requested the design. Gave design parameters. Printed then test fitted the buttstock onto their AKM pattern
rifle.
Version: 1.0.0
Initial release
FBS-4-QD (AKM) V1.0.2: Laffs Dynamics
Fixed stock for AKMs, designed to mimic the aesthetics and feel of original FBS-4 (AKM). Has four QD sling sockets.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 32%+
Support Material Percentage: 18%
Accreditations:
RK Spookware: Requested the design. Gave design parameters. Printed then test fitted the buttstock onto their AKM pattern
rifle.
1.5K
169
Dec 23, 2022
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
FBS-4-QD (AKM) V1.0.2.zip | zip |
Version: FBS-4-QD (AKM) V1.0.2 latest
Fixed stock for AKMs, designed to mimic the aesthetics and feel of original FBS-4 (AKM). Has four QD sling sockets.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 32%+
Support Material Percentage: 18%
Accreditations:
RK Spookware: Requested the design. Gave design parameters. Printed then test fitted the buttstock onto their AKM pattern rifle.
Version: FBS-4-QD (AKM) V1.0.1
FBS-4-QD (AKM) V1.0.1: Laffs Dynamics
Fixed stock for AKMs, designed to mimic the aesthetics and feel of original FBS-4-QD (AKM) V1.0.1. Has four QD sling sockets.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 32%+
Support Material Percentage: 18%
Accreditations:
RK Spookware: Requested the design. Gave design parameters. Printed then test fitted the buttstock onto their AKM pattern
rifle.
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.