FBS-5 (AKM) V1.0.2: Laffs Dynamics
Based off the FBS-4 AKM buttstock, this model is designed for a more modern look.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
File | Extension |
---|---|
FBS-5 (AKM) V1.0.2.zip | zip |
Version: FBS-5 (AKM) V1.0.2 latest
FBS-5 (AKM) V1.0.2: Laffs Dynamics
Based off the FBS-4 AKM buttstock, this model is designed for a more modern look.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
Version: FBS-5 (AKM) V1.0.1
FBS-5 (AKM) V1.0.1: Laffs Dynamics
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
Version: 1.0.0
initial upload
FBS-5 (AKM) V1.0.2: Laffs Dynamics
Based off the FBS-4 AKM buttstock, this model is designed for a more modern look.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
1.7K
235
Sep 05, 2023
Stereolithic object, Printable project
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
FBS-5 (AKM) V1.0.2.zip | zip |
Version: FBS-5 (AKM) V1.0.2 latest
FBS-5 (AKM) V1.0.2: Laffs Dynamics
Based off the FBS-4 AKM buttstock, this model is designed for a more modern look.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
Version: FBS-5 (AKM) V1.0.1
FBS-5 (AKM) V1.0.1: Laffs Dynamics
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
Version: 1.0.0
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.