FGC-9 MK-1 Christmas Ornament: Laffs Dynamics
Model of a FGC-9 MK1, designed to hang on the Christmas tree you know your cat will eventually knock over :3
Print in green, red, whiite, silver, or gold for them silly holiday feelz.
Manufactured split in two halves. Simply apply adhesive and to each flat half and clamp together for at least 2 1/2 hours.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 3+
Infill: 20%+
Material Flow: 100%
File | Extension |
---|---|
FGC-9 MK-1 Christmas Ornament.zip | zip |
Version: 1.0.0 latest
initial upload
FGC-9 MK-1 Christmas Ornament: Laffs Dynamics
Model of a FGC-9 MK1, designed to hang on the Christmas tree you know your cat will eventually knock over :3
Print in green, red, whiite, silver, or gold for them silly holiday feelz.
Manufactured split in two halves. Simply apply adhesive and to each flat half and clamp together for at least 2 1/2 hours.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 3+
Infill: 20%+
Material Flow: 100%
965
91
Jan 3, 2024
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 3.0
File | Extension |
---|---|
FGC-9 MK-1 Christmas Ornament.zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.