FGC-9 MK1 Charging Handle, Cross Hatch Stylized: Laffs Dynamics
Charging handle for the legacy FGC-9 MK1 3DP PCC. Stylized version of the Cross Hatch charging handle.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 32%
Accreditations:
JStark1809, IvanTheTroll, 3socksandcrocs; Creators of the FGC-9 MKI, used the charging handle geometry as a base for creating this design.
File | Extension |
---|---|
FGC-9 MK1 Charging Handle, Cross Hatched Stylized.zip | zip |
Version: 1.0.0 latest
Initial release
FGC-9 MK1 Charging Handle, Cross Hatch Stylized: Laffs Dynamics
Charging handle for the legacy FGC-9 MK1 3DP PCC. Stylized version of the Cross Hatch charging handle.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 32%
Accreditations:
JStark1809, IvanTheTroll, 3socksandcrocs; Creators of the FGC-9 MKI, used the charging handle geometry as a base for creating this design.
2.8K
218
Dec 29, 2022
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
FGC-9 MK1 Charging Handle, Cross Hatched Stylized.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.