FH Grip 001-M (AR-15): FFFTech/FFFTechnology
An AR grip, casually designed in my free time. No specific features were in mind when modeling.
A more comapct version of FH Grip 001. Designed for use on compact weapons such as SMGs and PDWs.
Has the same swell contour down the sides of the grip.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
File | Extension |
---|---|
FH Grip 001.zip | zip |
FH Grip 001-C.zip | zip |
Version: 1.0.0 latest
Initial release
FH Grip 001-M (AR-15): FFFTech/FFFTechnology
An AR grip, casually designed in my free time. No specific features were in mind when modeling.
A more comapct version of FH Grip 001. Designed for use on compact weapons such as SMGs and PDWs.
Has the same swell contour down the sides of the grip.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
1.3K
Mar 20, 2022
3D Printer
United States
English
QmTiJxqh1TQNA5PcVCwmscqYVbacx4Dk97VvTLe5AeZNMg
File | Extension |
---|---|
FH Grip 001.zip | zip |
FH Grip 001-C.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.