Forward Micro M-Lok AFG: FFFTech/FFFTechnology
A micro AFG, designed for compact PDWs such as:
*Sig MCX Rattler
*SP5K (if using M-Lok Handguard)
*CZ Scorpion EVO 3 S2 Pistol Micro
*Ruger PC Charger
Also the design works well for AK "Kink" builds that use M-Lok forends, as the insertion/removal of mags can be difficult with a full sized foregrip.
This AFG is angled 70° forwards, legally allowing it to be used on pistols.
Comes in four varieties:
*Standard
*Wrap Ridged
*Ridged
*Perforated
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 24%
Print the AFG upside down.
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
File | Extension |
---|---|
Forward Micro AFG.zip | zip |
Version: 1.0.0 latest
Forward Micro M-Lok AFG: FFFTech/FFFTechnology
A micro AFG, designed for compact PDWs such as:
*Sig MCX Rattler
*SP5K (if using M-Lok Handguard)
*CZ Scorpion EVO 3 S2 Pistol Micro
*Ruger PC Charger
Also the design works well for AK "Kink" builds that use M-Lok forends, as the insertion/removal of mags can be difficult with a full sized foregrip.
This AFG is angled 70° forwards, legally allowing it to be used on pistols.
Comes in four varieties:
*Standard
*Wrap Ridged
*Ridged
*Perforated
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 24%
Print the AFG upside down.
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
2K
203
Dec 20, 2021
United States
English
No license
QmdKPLPd7MTh1TGDziKGT61hdRddJs7YbcpqW3t3scNXmD
File | Extension |
---|---|
Forward Micro AFG.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.