G22 Grizzly v3 .22LR Single Shot Fully Printable Firearm
about
The G22 v3 is the third iteration of the G22 Grizzly platform. It is a single-shot break-action design which fires a .22LR round.
As with its predecessors, and in the deepest tradition of guncad, the G22 Grizzly is an almost 100% printable gun. The only required metal parts are a metal firing pin (made from a screw or drill bit), a breech plate, and a spring.
Detailed documentation is provided for printing and assembling this firearm, along with several modifications.
The v3 was designed to utilize the AWCY Protobarrel. These files are included in the release package.
files
| File | Extension |
|---|---|
| g22v3-RELEASE.zip | zip |
versions
Version: 1.0.0 latest
about
The G22 v3 is the third iteration of the G22 Grizzly platform. It is a single-shot break-action design which fires a .22LR round.
As with its predecessors, and in the deepest tradition of guncad, the G22 Grizzly is an almost 100% printable gun. The only required metal parts are a metal firing pin (made from a screw or drill bit), a breech plate, and a spring.
Detailed documentation is provided for printing and assembling this firearm, along with several modifications.
The v3 was designed to utilize the AWCY Protobarrel. These files are included in the release package.
Metrics
Views
20.2K
Downloads
1.3K
Project Info
release date
Feb 13, 2023
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
No license
version hash
QmNX7NGXhaDr75x4iSySrJLQFKU58VdPGiVKFhwZ9qAd7d
files
| File | Extension |
|---|---|
| g22v3-RELEASE.zip | zip |
versions
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
