DO NOT PAY FOR THESE FILES. They are free and open-source, if you are paying anything to access these files, you are being scammed. The files are hosted GitHub. The Gun Aiming Laser, or GAL, is a battery-powered, hand-operated, multi-spectrum target pointer, illuminator, and aiming laser system.

Features of the GAL v2:

• Vertical and horizontal adjustment of the VIS and IR Lasers
• 9 Modes
  • VIS Laser Low and High
  • Off
  • Program (allows the user to set flashes per second for the IR Illuminator)
  • IR Laser Low and High
  • IR Illuminator High
  • Dual IR Laser/Illuminator Low and High
• Battery: 1x 18650 or 1x CR123
• On-board and External Activation
• Double click for 'hold on' (5 minute timeout)
• IR Illumination: 850 or 940nm 3W LED
• Visible Laser: 5mW 650nm TTL Laser
• IR Laser: 5mW 850nm TTL Laser
• Height: 1.7” (1.4” above rail)
• Width: 2.9”
• Length: 4.2”
• Weight: 4.9oz (138g) (without battery)
• Battery Life: >6 hrs on DUAL HIGH mode (2000 mAh 18650)

Parts kits are available at knacktactical.com. These parts kits have everything you’ll need to build the GAL including a pre-soldered, pre-programmed, and tested PCB. The only things you will need are the 3D-printed parts and the tools for assembly.

You can reach KNACK by (in the preferred order):

• Discord (knack_tactical)
• email ([email protected])
• Opening an issue on the GitHub
• Reddit (u/knack_tactical)