Version 2.0 of my printable lower receiver for the Smith & Wesson M&P 15-22 platform. This version is based on the DS1913v2, and includes the use of front takedown pin standoffs and metal reinforcements from the Hoffman AR15 Super Lower.
04/22/24 (GC1522v2.1): A critical reliability concern has been addressed which resulted in intermittent light strikes due to the hammer impacting the front of the FCG pocket.
06/10/24 (GC1522v2.1.1): Small updates to the ReadMe and the model have been included to help prevent problems created from unusual slicer settings and to reference The Fair Deal magazine.
File | Extension |
---|---|
frameless-reloading-press-with-metric-hardware-model_files.zip | zip |
Version: 2.1.1 latest
initial upload
Version 2.0 of my printable lower receiver for the Smith & Wesson M&P 15-22 platform. This version is based on the DS1913v2, and includes the use of front takedown pin standoffs and metal reinforcements from the Hoffman AR15 Super Lower.
04/22/24 (GC1522v2.1): A critical reliability concern has been addressed which resulted in intermittent light strikes due to the hammer impacting the front of the FCG pocket.
06/10/24 (GC1522v2.1.1): Small updates to the ReadMe and the model have been included to help prevent problems created from unusual slicer settings and to reference The Fair Deal magazine.
231
13
Oct 23, 2024
United States
English
No license
File | Extension |
---|---|
frameless-reloading-press-with-metric-hardware-model_files.zip | zip |
Version: 2.1.1 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.