Glock Backplate
Printer Used: Anycubic Vyper
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Infill Pattern: Gyroid
Material Flow: 100%
File | Extension |
---|---|
gh0stbackplate.stl | stl |
Version: 1.0.0 latest
initial upload
Glock Backplate
Printer Used: Anycubic Vyper
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Infill Pattern: Gyroid
Material Flow: 100%
1.4K
440
Apr 10, 2022
3D Printer
United States
English
No license
File | Extension |
---|---|
gh0stbackplate.stl | stl |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.