Glock Guttersnipe Sight by FFFTech/FFFTechnology
A copy of US Patent US3777380A, aka the Guttersnipe Sight, originally designed by Paris Theodore for the ASP pistol. This copy is designed for Glock pistols, primarily for subcompact models such as the Glock: 26,
27, 29, 30, and 33.
This version is mounted via locking block, and has 3D printed inlays of the user's preferred color. (The human eye picks up green as the brightest color during daytime, in case one wishes to go for optimum visual clarity)
Ian McCollum of Forgotten Weapons published a video in 2015 describing the ASP pistol, and the Guttersnipe sight in detail. (Video time: 4min, 57secs)
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 208C
Bed: 54C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 36%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 25%
Print supports ONLY for the locking block, to support it's dovetail mount. Print the locking block on it's front face.
Hardware Required:
2x M3x5 Screws
Accreditation:
Ian McCollum for the published video, which gave me information on the usage and design of the sight.
Paris Theodore, original designer of the sight. (PDF of Patent US3777380A included in the design files)
File | Extension |
---|---|
Glock Guttersnipe Sight.zip | zip |
Version: 1.0.0 latest
Glock Guttersnipe Sight by FFFTech/FFFTechnology
A copy of US Patent US3777380A, aka the Guttersnipe Sight, originally designed by Paris Theodore for the ASP pistol. This copy is designed for Glock pistols, primarily for subcompact models such as the Glock: 26,
27, 29, 30, and 33.
This version is mounted via locking block, and has 3D printed inlays of the user's preferred color. (The human eye picks up green as the brightest color during daytime, in case one wishes to go for optimum visual clarity)
Ian McCollum of Forgotten Weapons published a video in 2015 describing the ASP pistol, and the Guttersnipe sight in detail. (Video time: 4min, 57secs)
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 208C
Bed: 54C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 36%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 25%
Print supports ONLY for the locking block, to support it's dovetail mount. Print the locking block on it's front face.
Hardware Required:
2x M3x5 Screws
Accreditation:
Ian McCollum for the published video, which gave me information on the usage and design of the sight.
Paris Theodore, original designer of the sight. (PDF of Patent US3777380A included in the design files)
6.8K
Jul 22, 2021
United States
English
QmXfP9yjEKT2xCiKr8ZrbQ2TqGwMgFDHyj8xasTNnV8Gey
File | Extension |
---|---|
Glock Guttersnipe Sight.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.