Glock Rear Sight Drift Block| Rev 1
about
Glock Rear Sight Drift Block, Rev 1: Laffs Dynamics
A block for drifting the rear sight via hammer and punch from a Glock slide. The rear sight can removed from either side of the slide, as the block has channels on both sides to accommodate. Designed around the Glock 17 Gen 4 Slide.
Revision 1.0: Now has parallel, ridged facets on the block's sides to allow for mounting into vise jaws. 6.2mm longer, 1.6mm shorter, and 7.5mm thinner than the original design. Added designer's logo.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 40%
files
| File | Extension |
|---|---|
| Glock Rear Sight Drift Block Rev 1.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
Glock Rear Sight Drift Block, Rev 1: Laffs Dynamics
A block for drifting the rear sight via hammer and punch from a Glock slide. The rear sight can removed from either side of the slide, as the block has channels on both sides to accommodate. Designed around the Glock 17 Gen 4 Slide.
Revision 1.0: Now has parallel, ridged facets on the block's sides to allow for mounting into vise jaws. 6.2mm longer, 1.6mm shorter, and 7.5mm thinner than the original design. Added designer's logo.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 40%
creator
Metrics
Views
2.4K
Downloads
314
Project Info
release date
Jan 11, 2023
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| Glock Rear Sight Drift Block Rev 1.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
