Creator: MrChonkers
A slightly updated version with steel chamber liners and a guide rod to hold it into battery.
I haven't printed one of this version yet as of 3-30-24 so its an alpha. It uses the same parts as the V1 but requires a 1 5/8" fence post or steel tube to be a chamber liner. it needs to have a 39-39.5mm ID to work with the majority of 37mm shells.
the guide rod should work with an unmodified carbine buffer spring. the guide rod and chamber axis rod can be made from 5/8" aluminum or printed and have 1/4-20 threaded rod inserted.
this is a fusion 360 file for now because i realized STEP files were losing most of the file management i was doing.
File | Extension |
---|---|
GOCK WEON 38mm v2.f3d | f3d |
Version: 2.0.0 latest
initial upload
Creator: MrChonkers
A slightly updated version with steel chamber liners and a guide rod to hold it into battery.
I haven't printed one of this version yet as of 3-30-24 so its an alpha. It uses the same parts as the V1 but requires a 1 5/8" fence post or steel tube to be a chamber liner. it needs to have a 39-39.5mm ID to work with the majority of 37mm shells.
the guide rod should work with an unmodified carbine buffer spring. the guide rod and chamber axis rod can be made from 5/8" aluminum or printed and have 1/4-20 threaded rod inserted.
this is a fusion 360 file for now because i realized STEP files were losing most of the file management i was doing.
2.5K
175
Mar 30, 2024
United States
English
No license
File | Extension |
---|---|
GOCK WEON 38mm v2.f3d | f3d |
Version: 2.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.