"Heavy Handed" Knuckleduster: FFFTech/FFFTechnology
A knuckleduster with a standard styled outline, but with a taper of 4.5°, having the knuckles of the design be wider than it's palm rest.
The knuckles make more surface contact with flesh, compared to more conventional designs.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5 - 7
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Note: This is a paperweight.
File | Extension |
---|---|
Heavy Handed Knuckleduster.zip | zip |
Version: 1.0.0 latest
"Heavy Handed" Knuckleduster: FFFTech/FFFTechnology
A knuckleduster with a standard styled outline, but with a taper of 4.5°, having the knuckles of the design be wider than it's palm rest.
The knuckles make more surface contact with flesh, compared to more conventional designs.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5 - 7
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Note: This is a paperweight.
7.8K
1.1K
May 21, 2024
United States
English
QmPS5RtVPYvufGvHaVNLgSbJ7upegPbCyR64K7FxFJbY2n
File | Extension |
---|---|
Heavy Handed Knuckleduster.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.