This is a 3D-printable replacement stock for the Henry Classic rimfire series lever-action rifles. The design is split into two parts to enable printing from mid-size SLA printers. There is 100um clearance between the two stock pieces, whic is meant to support a glued joint. Thick super glue tends to work the best, and will be stronger than the plastic itself.
The bottom rear holes are meant for Mapgpul QD style sttachment inserts. Depending on the vendor, some mild sanding may be required for fitment.
The holes for the buttplate attachment are designed for M5 screws and leave material for tapping threads. If using a resin printer, Sirayatech Build resin is suggested, as it taps very nicely without risk of cracking. Same goes for the holes for the cheek riser.
I have test-printed and fitted this for my own Henry H001, but additional feedback for future iterations would be greatly appreciated.
File | Extension |
---|---|
StockBase.stl | stl |
Stock.stl | stl |
StochHandleV2.stl | stl |
CheekRiser.stl | stl |
Version: 1.0.0 latest
Initial release
This is a 3D-printable replacement stock for the Henry Classic rimfire series lever-action rifles. The design is split into two parts to enable printing from mid-size SLA printers. There is 100um clearance between the two stock pieces, whic is meant to support a glued joint. Thick super glue tends to work the best, and will be stronger than the plastic itself.
The bottom rear holes are meant for Mapgpul QD style sttachment inserts. Depending on the vendor, some mild sanding may be required for fitment.
The holes for the buttplate attachment are designed for M5 screws and leave material for tapping threads. If using a resin printer, Sirayatech Build resin is suggested, as it taps very nicely without risk of cracking. Same goes for the holes for the cheek riser.
I have test-printed and fitted this for my own Henry H001, but additional feedback for future iterations would be greatly appreciated.
9.6K
1.2K
Jul 19, 2022
3D Printer
United States
English
No license
QmSZDAGDmJW1Uz4fEEJysVmk6Qdfghz1JHTfJxrWLk4GHE
File | Extension |
---|---|
StockBase.stl | stl |
Stock.stl | stl |
StochHandleV2.stl | stl |
CheekRiser.stl | stl |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.