HG-1 (FGC-9 MKII): Laffs Dynamics
Second Laffs Dynamics handguard design for the FGC-9 weapon platform.
Specifically for the MKII, simplistic in design.
Wide open ended design, the M-Lok slots acting as ventilation of heat.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 38%+
Support Material Percentage: 20%
Print the handguard on it front face.
Notes:
1) This data pack is just for printing the handguard. To get the base firearm data pack, use the following link:
(https://odysee.com/@TheGatalog-HybridDesigns:0/FGC-9_MkII_Rev1:f)
File | Extension |
---|---|
FGC-9 MK2 HG-1.zip | zip |
Version: 1.0.0 latest
initial upload
HG-1 (FGC-9 MKII): Laffs Dynamics
Second Laffs Dynamics handguard design for the FGC-9 weapon platform.
Specifically for the MKII, simplistic in design.
Wide open ended design, the M-Lok slots acting as ventilation of heat.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 38%+
Support Material Percentage: 20%
Print the handguard on it front face.
Notes:
1) This data pack is just for printing the handguard. To get the base firearm data pack, use the following link:
(https://odysee.com/@TheGatalog-HybridDesigns:0/FGC-9_MkII_Rev1:f)
1.9K
148
Mar 22, 2023
Stereolithic object, Printable project
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
FGC-9 MK2 HG-1.zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.