So, for those of you that want more grip to your HK VP9, here is a solution. It was designed for a TPU material. If you print it in PLA it's probably not going to work. The nubbins were styled after the HK USP. But these are even more aggressive.
I printed in a Polymaker 95HF and it works good. Wall thickness of 2 and 12% infill is a good starting point to get your desired squishyness. I did a few in Polymaker 90, and that didn't print as well. Note: I have a Bowden set up. But the 90 was easier to tune in the desired squishyness.
There is even a fun quote on the back.
The support is meant to be cut away and you can put the seam on the support to make it pretty.
File | Extension |
---|---|
VP9 Back Plate29 milo deco.stl | stl |
Version: 1.0.0 latest
Initial release
So, for those of you that want more grip to your HK VP9, here is a solution. It was designed for a TPU material. If you print it in PLA it's probably not going to work. The nubbins were styled after the HK USP. But these are even more aggressive.
I printed in a Polymaker 95HF and it works good. Wall thickness of 2 and 12% infill is a good starting point to get your desired squishyness. I did a few in Polymaker 90, and that didn't print as well. Note: I have a Bowden set up. But the 90 was easier to tune in the desired squishyness.
There is even a fun quote on the back.
The support is meant to be cut away and you can put the seam on the support to make it pretty.
1.4K
104
Aug 12, 2022
3D Printer
United States
English
No license
QmWUnAuyM9gk98PuqsDVAkoFTPuY9ALsCycU2AUwGRh8pb
File | Extension |
---|---|
VP9 Back Plate29 milo deco.stl | stl |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.