Hoffman Tactical Gen 2 Stock System
about
Purchase parts and support the creator of this lower at hoffmantactical.com!
This stock system is designed to work with Mil Spec Carbine Buffer Tubes that use a Castle Nut and Anti Tilt Plate. These stocks will not work with Rifle Length Buffer Tubes and may have problems with some Commercial Tubes.
Included are both STL and SOLIDWORKS Part files. The STL files are what you will use for most work.
There is a selection of both “Neck” and “Butt” parts. The three Neck pieces are designed to blend with different lowers. One is designed to be used with a “Mil Spec” aluminum lower, while the other two are for the AR-15 and LR-308 Super Lower.
For more info, please review the included README.
files
| File | Extension |
|---|---|
| Stock Pad Gen 2.STL | STL |
| Stock Pad Gen 2.SLDPRT | SLDPRT |
| Stock Pad Gen 2.3mf | 3mf |
| Stock Neck Mil Spec Gen 2.STL | STL |
| Stock Neck Mil Spec Gen 2.SLDPRT | SLDPRT |
| Stock Neck LR-308 Gen 2.STL | STL |
| Stock Neck LR-308 Gen 2.SLDPRT | SLDPRT |
| Stock Neck AR-15 Gen 2.STL | STL |
| Stock Neck AR-15 Gen 2.SLDPRT | SLDPRT |
| Stock Gen 2 LR-308.3mf | 3mf |
| Stock Butt Short No Pad Gen 2.STL | STL |
| Stock Butt Short No Pad Gen 2.SLDPRT | SLDPRT |
| Stock Butt Short Gen 2.STL | STL |
| Stock Butt Short Gen 2.SLDPRT | SLDPRT |
| Stock Butt No Pad Gen 2.STL | STL |
| Stock Butt No Pad Gen 2.SLDPRT | SLDPRT |
| Stock Butt Gen 2.STL | STL |
| Stock Butt Gen 2.SLDPRT | SLDPRT |
| Stock AR-15 Gen 2.3mf | 3mf |
| README.txt | txt |
| Brace.STL | STL |
| Brace.SLDPRT | SLDPRT |
| Brace.JPG | JPG |
versions
Version: 1.0.0 latest
about
Purchase parts and support the creator of this lower at hoffmantactical.com!
This stock system is designed to work with Mil Spec Carbine Buffer Tubes that use a Castle Nut and Anti Tilt Plate. These stocks will not work with Rifle Length Buffer Tubes and may have problems with some Commercial Tubes.
Included are both STL and SOLIDWORKS Part files. The STL files are what you will use for most work.
There is a selection of both “Neck” and “Butt” parts. The three Neck pieces are designed to blend with different lowers. One is designed to be used with a “Mil Spec” aluminum lower, while the other two are for the AR-15 and LR-308 Super Lower.
For more info, please review the included README.
organization
creator
Metrics
Views
3.2K
Downloads
627
Project Info
release date
Mar 02, 2022
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
No license
version hash
QmbsVw6yPMZj8CoFEDDHrLuUCf2aLnpu2ZRj8EfS2xSHV8
files
| File | Extension |
|---|---|
| Stock Pad Gen 2.STL | STL |
| Stock Pad Gen 2.SLDPRT | SLDPRT |
| Stock Pad Gen 2.3mf | 3mf |
| Stock Neck Mil Spec Gen 2.STL | STL |
| Stock Neck Mil Spec Gen 2.SLDPRT | SLDPRT |
| Stock Neck LR-308 Gen 2.STL | STL |
| Stock Neck LR-308 Gen 2.SLDPRT | SLDPRT |
| Stock Neck AR-15 Gen 2.STL | STL |
| Stock Neck AR-15 Gen 2.SLDPRT | SLDPRT |
| Stock Gen 2 LR-308.3mf | 3mf |
| Stock Butt Short No Pad Gen 2.STL | STL |
| Stock Butt Short No Pad Gen 2.SLDPRT | SLDPRT |
| Stock Butt Short Gen 2.STL | STL |
| Stock Butt Short Gen 2.SLDPRT | SLDPRT |
| Stock Butt No Pad Gen 2.STL | STL |
| Stock Butt No Pad Gen 2.SLDPRT | SLDPRT |
| Stock Butt Gen 2.STL | STL |
| Stock Butt Gen 2.SLDPRT | SLDPRT |
| Stock AR-15 Gen 2.3mf | 3mf |
| README.txt | txt |
| Brace.STL | STL |
| Brace.SLDPRT | SLDPRT |
| Brace.JPG | JPG |
versions
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
