Hybrid Square Tube SMG
about
An open-bolt, full auto only printable 9mm SMG utilizing an upper receiver made from 30mm x 2mm steel square box section. Compatible with both standard and printable Glock magazines. The trigger and sear block design (combined with a filed down bolt) can be printed in PLA although a sear block cut from 15mm thick aluminum plate should ideally replace the PLA one.
The bolt body is made by combining a length of 25mm x 2mm-2.5mm mild steel square tube with a length of 20mm x 2mm square tube 16mm dia steel bar stock.
If 25mm x 2.5mm round tube is used for the bolt body, the cocking handle slot on the receiver should be relocated and positioned along the top corner at a 45 degree angle. A cheap telescoping lug wrench will provide a suitable source for 20mm tube and 16mm bar.
Two Handguard files are included, one compatible with barrels over 164mm and a shorter version for use with a 114mm long barrel.
files
| File | Extension |
|---|---|
| HybridPrintedSquareTubeSMGV1.1.rar | rar |
versions
Version: V1.1 latest
Updated assembly.
Version: V1.1
Updated assembly.
Version: 1.0
Initial release
about
An open-bolt, full auto only printable 9mm SMG utilizing an upper receiver made from 30mm x 2mm steel square box section. Compatible with both standard and printable Glock magazines. The trigger and sear block design (combined with a filed down bolt) can be printed in PLA although a sear block cut from 15mm thick aluminum plate should ideally replace the PLA one.
The bolt body is made by combining a length of 25mm x 2mm-2.5mm mild steel square tube with a length of 20mm x 2mm square tube 16mm dia steel bar stock.
If 25mm x 2.5mm round tube is used for the bolt body, the cocking handle slot on the receiver should be relocated and positioned along the top corner at a 45 degree angle. A cheap telescoping lug wrench will provide a suitable source for 20mm tube and 16mm bar.
Two Handguard files are included, one compatible with barrels over 164mm and a shorter version for use with a 114mm long barrel.
creator
Metrics
Views
10.7K
Downloads
813
Project Info
release date
Nov 18, 2022
artifact type
library category
fabrication method
fabrication tools
3D Printer, Drill Press, Angle Grinder, Welder
language
English
license
No license
version hash
QmPD18d6kNHQ9gyyPkfte3EeJFAgydhgcjK3qqUxbjK1Kr
files
| File | Extension |
|---|---|
| HybridPrintedSquareTubeSMGV1.1.rar | rar |
versions
Version: V1.1 latest
Updated assembly.
Version: V1.1
Updated assembly.
Version: 1.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
