Keymod Accessory Mount CAD Template by Laffs Dynamics
STL and STEP files of an accessory mount template that attaches to Keymod rails. Otherwise known as Dick Mod.
These files are intended to aid in firearm accessory design. Whilst they can be 3D printed, they're meant to be used in
CAD software such as Fusion 360.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5
Infill: 25%
Material Flow: 100%
"Is that Keymod? Yes, that is a C H A D M O V E."
PSR, 2021
File | Extension |
---|---|
Keymod CAD Template.zip | zip |
Version: 1.0.0 latest
Initial release
Keymod Accessory Mount CAD Template by Laffs Dynamics
STL and STEP files of an accessory mount template that attaches to Keymod rails. Otherwise known as Dick Mod.
These files are intended to aid in firearm accessory design. Whilst they can be 3D printed, they're meant to be used in
CAD software such as Fusion 360.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5
Infill: 25%
Material Flow: 100%
"Is that Keymod? Yes, that is a C H A D M O V E."
PSR, 2021
1.4K
110
Sep 22, 2022
3D Printer
United States
English
Creative Commons Attribution-NonCommercial 4.0 International
File | Extension |
---|---|
Keymod CAD Template.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.