Laffs J Frame Speed Loader V2.0.1
about
Laffs J Frame Speed Loader V2.0.1: Laffs Dynamics
Version 2 of the original Laffs Dynamics J Frame Speed Loader; designed specifically for 5rd, .38Spl/.357Mag revolvers.
New Features Include:
*Reduced cartridge release knob turn of 30 deg, instead of 35deg.
*New cartridge retention spindle that now interlocks with the release knob.
*Longer cartridge holder, spindle, and release knobs for better control when feeding into a revolver cylinder.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Support Material Percentage: 22%
Support material only needed for the detent channel at the bottom of the cartridge holder, and under the mechanically compliant spring/catch on the release knob.
Hardware Required:
1x M3x12mm Hex Screw
Note: The original Laffs J Frame Speed Loader can be found here: https://defcad.com/library/95400125-ec64-441e-8117-49939c3fb25e/
files
| File | Extension |
|---|---|
| 3FTech J Frame Speed Loader V2.0.1.zip | zip |
versions
Version: Laffs J Frame Speed Loader V2.0.1 latest
Version 2 of the original Laffs Dynamics J Frame Speed Loader; designed specifically for 5rd, .38Spl/.357Mag revolvers.
New Features Include:
*Reduced cartridge release knob turn of 30 deg, instead of 35deg.
*New cartridge retention spindle that now interlocks with the release knob.
*Longer cartridge holder, spindle, and release knobs for better control when feeding into a revolver cylinder.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Support Material Percentage: 22%
Support material only needed for the detent channel at the bottom of the cartridge holder, and under the mechanically compliant spring/catch on the release knob.
Hardware Required:
1x M3x12mm Hex Screw
Note: The original Laffs J Frame Speed Loader can be found here: https://defcad.com/library/95400125-ec64-441e-8117-49939c3fb25e/
Version: 1.0.0
about
Laffs J Frame Speed Loader V2.0.1: Laffs Dynamics
Version 2 of the original Laffs Dynamics J Frame Speed Loader; designed specifically for 5rd, .38Spl/.357Mag revolvers.
New Features Include:
*Reduced cartridge release knob turn of 30 deg, instead of 35deg.
*New cartridge retention spindle that now interlocks with the release knob.
*Longer cartridge holder, spindle, and release knobs for better control when feeding into a revolver cylinder.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Support Material Percentage: 22%
Support material only needed for the detent channel at the bottom of the cartridge holder, and under the mechanically compliant spring/catch on the release knob.
Hardware Required:
1x M3x12mm Hex Screw
Note: The original Laffs J Frame Speed Loader can be found here: https://defcad.com/library/95400125-ec64-441e-8117-49939c3fb25e/
creator
Metrics
Views
2.9K
Project Info
release date
Sep 05, 2023
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
files
| File | Extension |
|---|---|
| 3FTech J Frame Speed Loader V2.0.1.zip | zip |
versions
Version: Laffs J Frame Speed Loader V2.0.1 latest
Version 2 of the original Laffs Dynamics J Frame Speed Loader; designed specifically for 5rd, .38Spl/.357Mag revolvers.
New Features Include:
*Reduced cartridge release knob turn of 30 deg, instead of 35deg.
*New cartridge retention spindle that now interlocks with the release knob.
*Longer cartridge holder, spindle, and release knobs for better control when feeding into a revolver cylinder.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Support Material Percentage: 22%
Support material only needed for the detent channel at the bottom of the cartridge holder, and under the mechanically compliant spring/catch on the release knob.
Hardware Required:
1x M3x12mm Hex Screw
Note: The original Laffs J Frame Speed Loader can be found here: https://defcad.com/library/95400125-ec64-441e-8117-49939c3fb25e/
Version: 1.0.0
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
