Laffs M-Lok Rough Cut Slot Covers
about
Laffs M-Lok Rough Cut Slot Covers: Laffs Dynamics
Basic bitch M-Lok slot covers, tapered and rounded for comfort in the hand.
Comes in three variants:
*3 Slot
*2 Slot
*1 Slot
- Printer Used: Ender 3 V2
- Filament Used: PLA+
Print Settings:
- Extruder: 218C
- Bed: 56C
- First Layer Print Height: .20mm
- Standard Layer Height: .16mm - .20mm
- Wall Thickness: .40mm
- Wall Perimeters: 5+
- Infill: 25%
- Support Material Percentage: 18%
- Print the AFG upside down.
- Use support blockers; as the inside of the foregrip is semi-hollow.
Hardware Needed:
- 2x M5x10 Hex Socketed Machine Screw/Bolt
- 2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
(Only one of each hardware part needed for the single slot cover.)
files
| File | Extension |
|---|---|
| Laffs Rough Cut M-Lok Slot Covers.zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
Laffs M-Lok Rough Cut Slot Covers: Laffs Dynamics
Basic bitch M-Lok slot covers, tapered and rounded for comfort in the hand.
Comes in three variants:
*3 Slot
*2 Slot
*1 Slot
- Printer Used: Ender 3 V2
- Filament Used: PLA+
Print Settings:
- Extruder: 218C
- Bed: 56C
- First Layer Print Height: .20mm
- Standard Layer Height: .16mm - .20mm
- Wall Thickness: .40mm
- Wall Perimeters: 5+
- Infill: 25%
- Support Material Percentage: 18%
- Print the AFG upside down.
- Use support blockers; as the inside of the foregrip is semi-hollow.
Hardware Needed:
- 2x M5x10 Hex Socketed Machine Screw/Bolt
- 2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
(Only one of each hardware part needed for the single slot cover.)
creator
Metrics
Views
799
Downloads
128
Project Info
release date
May 29, 2024
artifact types
Stereolithic object, Printable project
library category
fabrication method
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| Laffs Rough Cut M-Lok Slot Covers.zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
