Tired of tuning your sears? Ever Overtighten or under glue? what if you want something more discrete? Big Boog introduces our "Experimental" low-profile fixed Glock Auto Sear to DefCad members for free, the idea is with more simplicity comes more reliability and less time to print. This new design has reduced print time from 40 mins-1 hour for traditional designs down to 20 minutes on my Ender 3 pro.
(designed for educational and SOT research.
designed to fit all doublestack Glocks. Use responsibly with discretion.)
if any SOT with any singlestack glocks/glock 22 conversions is interested in R&D testing please contact me via insta @houseactual
If you're interested in more gun accessories similar to this and others on this site please feel free to pledge a few dollars to help us keep this hobby going.
RECOMMENDED: Printing in the vertical orientation,100% infill, .16 layer height
OPTIONAL: slow print speed when about 50% through the disconnector for a cleaner result (functionally identical just makes excess cleaner)
FITTING: remove supports from print, install backplate to *safe* slide, with one hand apply a constant force to ensure the slide is in battery and dryfire (repeat the last step a few times if necessary to break in the disconnector.)
we have recently tweaked the design slightly to ensure a tighter fit. thank you to our supporters.
File | Extension |
---|---|
lpgsV2.stl | stl |
Version: 1.0.3 latest
updated version with tapered sear towards the rear to minimize size and prevent frame rub.
Tired of tuning your sears? Ever Overtighten or under glue? what if you want something more discrete? Big Boog introduces our "Experimental" low-profile fixed Glock Auto Sear to DefCad members for free, the idea is with more simplicity comes more reliability and less time to print. This new design has reduced print time from 40 mins-1 hour for traditional designs down to 20 minutes on my Ender 3 pro.
(designed for educational and SOT research.
designed to fit all doublestack Glocks. Use responsibly with discretion.)
if any SOT with any singlestack glocks/glock 22 conversions is interested in R&D testing please contact me via insta @houseactual
If you're interested in more gun accessories similar to this and others on this site please feel free to pledge a few dollars to help us keep this hobby going.
RECOMMENDED: Printing in the vertical orientation,100% infill, .16 layer height
OPTIONAL: slow print speed when about 50% through the disconnector for a cleaner result (functionally identical just makes excess cleaner)
FITTING: remove supports from print, install backplate to *safe* slide, with one hand apply a constant force to ensure the slide is in battery and dryfire (repeat the last step a few times if necessary to break in the disconnector.)
we have recently tweaked the design slightly to ensure a tighter fit. thank you to our supporters.
30.1K
2.6K
Jan 18, 2023
3D Printer
United States
English
No license
File | Extension |
---|---|
lpgsV2.stl | stl |
Version: 1.0.3 latest
updated version with tapered sear towards the rear to minimize size and prevent frame rub.
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.