M-Lok Accessory Mount CAD Template by FFFTech/FFFTechnology
STL and STEP files of an accessory mount template that attaches to M-Lok rails. I
designed this model myself for developing accessories for modern carbines and the like.
These files are intended to aid in firearm accessory design. Whilst they can be 3D printed,
they're meant to be used in CAD software such as Fusion 360.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 204C
Bed: 54C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
M-Lok Rail depths were recorded from .8mm - 2.8mm deep.
Hardware Needed:
2x M5x12 Hex Screw
2x M-Lok T-Nut
File | Extension |
---|---|
M-Lock Rail Template.zip | zip |
Version: 1.0.0 latest
M-Lok Accessory Mount CAD Template by FFFTech/FFFTechnology
STL and STEP files of an accessory mount template that attaches to M-Lok rails. I
designed this model myself for developing accessories for modern carbines and the like.
These files are intended to aid in firearm accessory design. Whilst they can be 3D printed,
they're meant to be used in CAD software such as Fusion 360.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 204C
Bed: 54C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
M-Lok Rail depths were recorded from .8mm - 2.8mm deep.
Hardware Needed:
2x M5x12 Hex Screw
2x M-Lok T-Nut
3K
257
Jun 21, 2021
United States
English
QmPLQ8PUNXfcV2ARGb7bmx6tJkMdNPdxhPXweknoV9Mmfh
File | Extension |
---|---|
M-Lock Rail Template.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.