M70 (Yugo AK) Picatinny Buttstock Adaptor
about
M70 Picatinny Buttstock Adaptor V1.0.1: Laffs Dynamics
A 4 slot picatinny adaptor for Zastava (AKA Yugo) M70 AK variants.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 50%+
Support Material Percentage: 16%
Hardware Needed:
1x M8x30 Bolt, 1mm fine thread pitch (NOT 1.25mm)
1x M8 Washer, 15mm OD (Optional)
2x M4x12mm (Or M4x15mm) Bolts
2x M4 Nuts
files
| File | Extension |
|---|---|
| M70 Picatinny Buttstock Adaptor V1.0.1.zip | zip |
versions
Version: M70 Picatinny Buttstock Adaptor V1.0.1 latest
M70 Picatinny Buttstock Adaptor V1.0.1: Laffs Dynamics
A 4 slot picatinny adaptor for Zastava (AKA Yugo) M70 AK variants.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Material Flow: 100%
Support Material Percentage: 16%
Hardware Needed:
1x M8x30 Bolt, 1mm fine thread pitch (NOT 1.25mm)
1x M8 Washer, 15mm OD (Optional)
2x M4x12mm (Or M4x15mm) Bolts
2x M4 Nuts
Version: 1.0.0
Initial release
about
M70 Picatinny Buttstock Adaptor V1.0.1: Laffs Dynamics
A 4 slot picatinny adaptor for Zastava (AKA Yugo) M70 AK variants.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 50%+
Support Material Percentage: 16%
Hardware Needed:
1x M8x30 Bolt, 1mm fine thread pitch (NOT 1.25mm)
1x M8 Washer, 15mm OD (Optional)
2x M4x12mm (Or M4x15mm) Bolts
2x M4 Nuts
creator
Metrics
Views
2.6K
Downloads
295
Project Info
release date
Nov 29, 2023
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| M70 Picatinny Buttstock Adaptor V1.0.1.zip | zip |
versions
Version: M70 Picatinny Buttstock Adaptor V1.0.1 latest
M70 Picatinny Buttstock Adaptor V1.0.1: Laffs Dynamics
A 4 slot picatinny adaptor for Zastava (AKA Yugo) M70 AK variants.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Material Flow: 100%
Support Material Percentage: 16%
Hardware Needed:
1x M8x30 Bolt, 1mm fine thread pitch (NOT 1.25mm)
1x M8 Washer, 15mm OD (Optional)
2x M4x12mm (Or M4x15mm) Bolts
2x M4 Nuts
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
