ML1-HS Handguard (MP5K)
about
ML1-HS Handguard (MP5K): Laffs Dynamics
A handguard for the HK MP5K, MP5K PDW, and licensed copies/clones. (SMGs and pistol variants.)
Has 1 1/2 M-Lok slots on the 4-5, 6, and 7-8 o clock facets, as well as 1 M-Lok slot on the 3 and 9 o clock facets.
Vented towards the top of the handguard for better air cooling during rapid fire.
Test fitted on an MKE AP5-M. (HK licensed and tooling built.)
Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon
Print Settings:
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 50%+
Support Material Percentage: 20%
Print the mount on it's rear face.
files
| File | Extension |
|---|---|
| HG-2 (MP5K).zip | zip |
versions
Version: HG-2 Handguard (MP5K) latest
HG-2 (MP5K): Laffs Dynamics
A handguard for the HK MP5K, MP5K PDW, and licensed copies/clones. (SMGs and pistol variants.)
Has 1 1/2 M-Lok slots on the 4-5, 6, and 7-8 o clock facets, as well as 1 M-Lok slot on the 3 and 9 o clock facets.
Vented towards the top of the handguard for better air cooling during rapid fire.
Test fitted on an MKE AP5-M. (HK licensed and tooling built.)
Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon
Print Settings:
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 50%+
Support Material Percentage: 20%
Print the mount on it's rear face.
Version: 1.0.0
Initial release
about
ML1-HS Handguard (MP5K): Laffs Dynamics
A handguard for the HK MP5K, MP5K PDW, and licensed copies/clones. (SMGs and pistol variants.)
Has 1 1/2 M-Lok slots on the 4-5, 6, and 7-8 o clock facets, as well as 1 M-Lok slot on the 3 and 9 o clock facets.
Vented towards the top of the handguard for better air cooling during rapid fire.
Test fitted on an MKE AP5-M. (HK licensed and tooling built.)
Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon
Print Settings:
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 50%+
Support Material Percentage: 20%
Print the mount on it's rear face.
creator
Metrics
Views
2.6K
Downloads
348
Project Info
release date
Sep 27, 2023
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| HG-2 (MP5K).zip | zip |
versions
Version: HG-2 Handguard (MP5K) latest
HG-2 (MP5K): Laffs Dynamics
A handguard for the HK MP5K, MP5K PDW, and licensed copies/clones. (SMGs and pistol variants.)
Has 1 1/2 M-Lok slots on the 4-5, 6, and 7-8 o clock facets, as well as 1 M-Lok slot on the 3 and 9 o clock facets.
Vented towards the top of the handguard for better air cooling during rapid fire.
Test fitted on an MKE AP5-M. (HK licensed and tooling built.)
Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon
Print Settings:
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 50%+
Support Material Percentage: 20%
Print the mount on it's rear face.
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
