MMK 342
about
Introducing MMK 342 - Open Bolt Action - 22 LR Semi Automatic Pistol
Worked two years for this project! The aim was making a pistol for low budget, keeping as simple as possible with minimum assemble. I am looking for cooperations & partnership or business opportunity to create legalized manufacturing, this model is an example for low cost production. There is also another model, which some of the parts can be turned to the metal with same mechanism.
- This model prepared for 22 LR ammunition, tolerances has been given, but haven't tested, remains as a prototype at this moment,
! RISKS ARE YOUR OWN IF YOU'RE GOING TO TEST THIS MODEL !
- After printing all of the parts(8 parts), you need 4 spring(for trigger, trigger holder, striker, magazine) then ready to go!
- This is an open bolt action, if the magazine is loaded and striker was pulled, it will be ready to fire!
- Lower receiver, upper receiver, barrel, ejector is combined with the Frame part.
- Slider, extractor, trigger housing, firing pin is combined with the Striker part.
- This model can be converted to rifle easily.
- For frame part, 0.8 or 1 mm nozzle recommended.(with bigger nozzle, barrel can be printed without support)
- For striker part, Nylon+CF or PC filament recommended.
You can reach me via message, twitter or e-mail, Thank you!
files
| File | Extension |
|---|---|
| MMK 342.zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
Introducing MMK 342 - Open Bolt Action - 22 LR Semi Automatic Pistol
Worked two years for this project! The aim was making a pistol for low budget, keeping as simple as possible with minimum assemble. I am looking for cooperations & partnership or business opportunity to create legalized manufacturing, this model is an example for low cost production. There is also another model, which some of the parts can be turned to the metal with same mechanism.
- This model prepared for 22 LR ammunition, tolerances has been given, but haven't tested, remains as a prototype at this moment,
! RISKS ARE YOUR OWN IF YOU'RE GOING TO TEST THIS MODEL !
- After printing all of the parts(8 parts), you need 4 spring(for trigger, trigger holder, striker, magazine) then ready to go!
- This is an open bolt action, if the magazine is loaded and striker was pulled, it will be ready to fire!
- Lower receiver, upper receiver, barrel, ejector is combined with the Frame part.
- Slider, extractor, trigger housing, firing pin is combined with the Striker part.
- This model can be converted to rifle easily.
- For frame part, 0.8 or 1 mm nozzle recommended.(with bigger nozzle, barrel can be printed without support)
- For striker part, Nylon+CF or PC filament recommended.
You can reach me via message, twitter or e-mail, Thank you!
creator
Metrics
Views
3.8K
Downloads
241
Project Info
release date
May 22, 2023
artifact types
CAD Object, Stereolithic object, Printable project
library categories
Printable Firearms, Printable Magazines, Printable Peripherals / Parts
fabrication methods
Primarily Printable, Printable Lower / Frame
fabrication tool
3D Printer
release countries
United States, Germany, Japan
languages
English, Turkish
license
Firearm Info
types
caliber
parts
Lower Receiver, Upper Receiver, Barrel, Frame, Trigger, Extractor, Magazine Release, Follower, Magazine, Magazine Bumper
files
| File | Extension |
|---|---|
| MMK 342.zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
