MP 22 (Replica Firearm)
about
This is a NON FIRING REPLICA of an open bolt Machine Pistol chambered for .22 LR . it does not actually fire as I removed the firing pin , Extractor and blocked the barrel.
!Don't forget to check out my other Cool designs and Follow my weekly KooKoo uploads, Enjoy ;)
Printer brand:
MakerBot
Printer:
Resolution:
Infill:
Notes:
LOWER, UPPER, SEAR, BOLT, MAG BODY & MAG CATCH :all require Raft and Support the rest don't
the Bolt & striker tubes are 6mm OD I'm not sure about the length but you can calculate it by measuring them on the STL, the stock tube is 25mm od 250 mm L
the springs are made using 0.8 piano wire wrapped around a 5mm rod the lengths need to be 175% of the carbon tubes
! Print Orientation STL : Shows you the directing of optimal print
files
| File | Extension |
|---|---|
| print_orientation.stl | stl |
| V9_UPPER.stl | stl |
| V9_TRIGGER.stl | stl |
| V9_SEAR.stl | stl |
| V9_RETURN_SPRING_HOLDER.stl | stl |
| V9_P_RAIL.stl | stl |
| V9_MP_22_Combined.stl | stl |
| V9_MAG_CATCH.stl | stl |
| V9_MAG_BODY.stl | stl |
| V9_MAG_BASE.stl | stl |
| V9_LOWER.stl | stl |
| V9_GRIP.stl | stl |
| V9_COCKING_HANDLE.stl | stl |
| V9_BOLT.stl | stl |
| V9_BARREL.stl | stl |
versions
Version: 1.0.0 latest
Initial release
about
This is a NON FIRING REPLICA of an open bolt Machine Pistol chambered for .22 LR . it does not actually fire as I removed the firing pin , Extractor and blocked the barrel.
!Don't forget to check out my other Cool designs and Follow my weekly KooKoo uploads, Enjoy ;)
Printer brand:
MakerBot
Printer:
Resolution:
Infill:
Notes:
LOWER, UPPER, SEAR, BOLT, MAG BODY & MAG CATCH :all require Raft and Support the rest don't
the Bolt & striker tubes are 6mm OD I'm not sure about the length but you can calculate it by measuring them on the STL, the stock tube is 25mm od 250 mm L
the springs are made using 0.8 piano wire wrapped around a 5mm rod the lengths need to be 175% of the carbon tubes
! Print Orientation STL : Shows you the directing of optimal print
creator
Metrics
Views
1.8K
Downloads
81
Project Info
release date
Jun 2, 2018
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
version hash
QmYidCDeaMwHdoNW5jiHS9aZQFaJu2c6P7btn9g3QttPMR
files
| File | Extension |
|---|---|
| print_orientation.stl | stl |
| V9_UPPER.stl | stl |
| V9_TRIGGER.stl | stl |
| V9_SEAR.stl | stl |
| V9_RETURN_SPRING_HOLDER.stl | stl |
| V9_P_RAIL.stl | stl |
| V9_MP_22_Combined.stl | stl |
| V9_MAG_CATCH.stl | stl |
| V9_MAG_BODY.stl | stl |
| V9_MAG_BASE.stl | stl |
| V9_LOWER.stl | stl |
| V9_GRIP.stl | stl |
| V9_COCKING_HANDLE.stl | stl |
| V9_BOLT.stl | stl |
| V9_BARREL.stl | stl |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
