Here is V2 of my M&P 9/40 (Full Size) Magazine Extension. This one has a much thicker base and is overall stronger. I used a M2 x 5mm allen head bolt to secure the extension to the magazine.
I print these flattest side down (backside) with Tri-Hex infill @ 100% for best results.
File | Extension |
---|---|
9 40 EXT.stl | stl |
Version: 2.0.0 latest
V2 upload
Here is V2 of my M&P 9/40 (Full Size) Magazine Extension. This one has a much thicker base and is overall stronger. I used a M2 x 5mm allen head bolt to secure the extension to the magazine.
I print these flattest side down (backside) with Tri-Hex infill @ 100% for best results.
1.2K
124
M&P 9/40 Magazine Extension (Full Size)
Sep 20, 2023
CAD Object, Stereolithic object
Printable Magazines, Printable Peripherals / Parts
United States
English
Creative Commons Attribution-NoDerivatives 4.0 International
File | Extension |
---|---|
9 40 EXT.stl | stl |
Version: 2.0.0 latest
V2 upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.