Origin Grip (ARK): FFFTech/FFFTechnology
The first of many grips designed specifically for the InvaderZip ARK Modular Weapon System.
Overall geometry is rather standard 3FTech aesthetics, but with an organic rear tang that interfaces with the ARK's lower receiver.
Mounts to:
* ARK V1
* ARK V1 DLC Expansion
* REDACTED
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
Accreditations:
InvaderZip: In collaboration for previous DLC grip design, and for designing REDACTED grip. Provided data on specific weapon disassembly, and grip interfacing geometry to create a template from.
File | Extension |
---|---|
ARK Origin Grip.zip | zip |
Version: 1.0.0 latest
Initial release
Origin Grip (ARK): FFFTech/FFFTechnology
The first of many grips designed specifically for the InvaderZip ARK Modular Weapon System.
Overall geometry is rather standard 3FTech aesthetics, but with an organic rear tang that interfaces with the ARK's lower receiver.
Mounts to:
* ARK V1
* ARK V1 DLC Expansion
* REDACTED
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
Accreditations:
InvaderZip: In collaboration for previous DLC grip design, and for designing REDACTED grip. Provided data on specific weapon disassembly, and grip interfacing geometry to create a template from.
1.5K
218
Jun 14, 2022
3D Printer
United States
English
QmTXMt8SARxR1A56r2yGUN8tnVgQMMEgc6WX7i1QPZc9Y3
File | Extension |
---|---|
ARK Origin Grip.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.