Picatinny AR Grip Mount: Laffs Dynamics
A picatinny mount, adapts AR-15 grips for the use as dedicated angled or vertical foregrips.
Any AR-15 grip with an angle of less or more than 90° is considered an angled foregrip if used in conjunction with the Picatinny AR Grip Mount. An AR-15 grip with an angle of EXACTLY 90° will be considered a vertical foregrip if used with the Picatinny AR Grip Mount.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Infill Pattern: Gyroid
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
File | Extension |
---|---|
Picatinny AR Grip Mount.zip | zip |
Version: 1.0.0 latest
Initial release
Picatinny AR Grip Mount: Laffs Dynamics
A picatinny mount, adapts AR-15 grips for the use as dedicated angled or vertical foregrips.
Any AR-15 grip with an angle of less or more than 90° is considered an angled foregrip if used in conjunction with the Picatinny AR Grip Mount. An AR-15 grip with an angle of EXACTLY 90° will be considered a vertical foregrip if used with the Picatinny AR Grip Mount.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Infill Pattern: Gyroid
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
2K
320
Jul 28, 2022
3D Printer
United States
English
QmX3CdUZEE9tMAFJtnV9NsVd4gH9AP65ZpgJLytxbBkh4K
File | Extension |
---|---|
Picatinny AR Grip Mount.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.