PMAG 10 Dual and Quad Mag Couplers
These couplers replace the baseplates on Magpul Gen M3 PMAG 10s
#Licensure - CC BY-NC-SA 4.0
https://creativecommons.org/licenses/by-nc-sa/4.0/
##Print Instructions
Material - PLA+
Walls/Top/Bottom - 5
Infill 99-100%
Support - Not needed if printed with the rear edge on the build plate.
##Files
PMAG 10 M3 Baseplate
PMAG 10 M3 Dual Mag Coupler
Pmag 10 M3 Quad Mag Coupler
Thanks to ctrlpew for designing the original PMAG baseplate this project was derived from.
Seize the means of your own defense at keybase.io/team/det_disp.
Subscribe to Reno May on YouTube.
File | Extension |
---|---|
PMAG-10-Couplers.zip | zip |
Version: 1.0.0 latest
PMAG 10 Dual and Quad Mag Couplers
These couplers replace the baseplates on Magpul Gen M3 PMAG 10s
#Licensure - CC BY-NC-SA 4.0
https://creativecommons.org/licenses/by-nc-sa/4.0/
##Print Instructions
Material - PLA+
Walls/Top/Bottom - 5
Infill 99-100%
Support - Not needed if printed with the rear edge on the build plate.
##Files
PMAG 10 M3 Baseplate
PMAG 10 M3 Dual Mag Coupler
Pmag 10 M3 Quad Mag Coupler
Thanks to ctrlpew for designing the original PMAG baseplate this project was derived from.
Seize the means of your own defense at keybase.io/team/det_disp.
Subscribe to Reno May on YouTube.
9.7K
1.1K
May 23, 2020
3D Printer
English
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
QmTW5Ty8iQLqrPEJc6WMCFv87fpPpJnzhn39z14r25aPrW
File | Extension |
---|---|
PMAG-10-Couplers.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.