Practical Scrap Metal Small Arms Vol. 9 - Build-A-Borz
about
Volume VOL of Professor Parabellum's Practical Scrap Metal Small Arms.
This volume provides plans and instructions on building a simple 100% DIY machine pistol using square and round stock and other common components.
"The simple machine pistol detailed here is very similar to other widely tried-and-tested expedient designs in circulation, though improved upon in terms of compactness, handling and ease of availability of materials required. It's essentially a homebuilt version of the Armenian K6-92, a compact machine pistol widely copied in the early 1990s by various separatist groups following the breakup of the Soviet Union. The commercial counterpart was chambered in 9x18 Makarov, though the general design adapts well to .380 or 9x19. This basic simplified version uses 9mm STEN magazines and includes an adaptable bolt weight system in it's design. Construction does not require a lathe or milling machine and only very basic tools may be used."
files
| File | Extension |
|---|---|
| Practical_Scrap_Metal_Small_Arms_Vol.09-Build-A-Borz.pdf |
versions
Version: 1.0.0 latest
Initial release
about
Volume VOL of Professor Parabellum's Practical Scrap Metal Small Arms.
This volume provides plans and instructions on building a simple 100% DIY machine pistol using square and round stock and other common components.
"The simple machine pistol detailed here is very similar to other widely tried-and-tested expedient designs in circulation, though improved upon in terms of compactness, handling and ease of availability of materials required. It's essentially a homebuilt version of the Armenian K6-92, a compact machine pistol widely copied in the early 1990s by various separatist groups following the breakup of the Soviet Union. The commercial counterpart was chambered in 9x18 Makarov, though the general design adapts well to .380 or 9x19. This basic simplified version uses 9mm STEN magazines and includes an adaptable bolt weight system in it's design. Construction does not require a lathe or milling machine and only very basic tools may be used."
creator
Metrics
Views
4.2K
Downloads
461
Project Info
release date
Jun 07, 2022
artifact types
library category
fabrication method
fabrication tools
Drill Press, Angle Grinder, Welder
language
English
license
No license
version hash
QmZAjcnfXXgAZU86ypJcsVeMYMSNTHTQ7nmWqDztJ3FnTD
files
| File | Extension |
|---|---|
| Practical_Scrap_Metal_Small_Arms_Vol.09-Build-A-Borz.pdf |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
