Project P.R.O.O.F. 3D-Printable Airgun
about
The "P.R.O.O.F." or Pneumatic Rifle of Online Freedom. The first 3D printed fully automatic air gun to be made available to the general public.
P.R.O.O.F. IS AN EXPERIMENTAL AIR GUN SYSTEM THAT IS STILL UNDER DEVELOPMENT AT THE TIME OF PUBLICATION (APRIL 2022). THIS IS THE FIRST EDITION AND THE P.R.O.O.F. VARIANT WITHIN THIS PUBLICATION IS CONSIDERED THE “HPA VARIANT.” THIS VARIANT IS DESIGNED TO FUNCTION AT HIGH PRESSURE NOT GREATER THAN 850 PSI.
Developed and tested by INMC. Visit their website and purchase parts kits here: https://inmc.fun/
files
| File | Extension |
|---|---|
| Trigger.stl | stl |
| Suppressor.stl | stl |
| Suppressor Locking Lever.stl | stl |
| Stock Locking Lever.stl | stl |
| Proof_Manual_Version_1_00.pdf | |
| Priming Gasket (Radius 2.7mm).stl | stl |
| Priming Gasket (Radius 2.775mm).stl | stl |
| Priming Gasket (Radius 2.75mm).stl | stl |
| Priming Gasket (Radius 2.725mm).stl | stl |
| Priming Gasket (Radius 2.6mm).stl | stl |
| Priming Gasket (Radius 2.675mm).stl | stl |
| Priming Gasket (Radius 2.65mm).stl | stl |
| Priming Gasket (Radius 2.5mm).stl | stl |
| Priming Gasket (Radius 2.55mm).stl | stl |
| Priming Gasket (Radius 2.4mm).stl | stl |
| Priming Gasket (Radius 2.3mm).stl | stl |
| Piston.stl | stl |
| Pistol Grip.stl | stl |
| Magazine Well.stl | stl |
| Magazine Gasket.stl | stl |
| Magazine (40) BB.stl | stl |
| Handguard.stl | stl |
| Gas Block_ low pressure.stl | stl |
| Gas Block.stl | stl |
| Gas Block Cover.stl | stl |
| Butt Stock.stl | stl |
| Buffer.stl | stl |
| Barrel Spine_no drill needed.stl | stl |
| Barrel Spine.stl | stl |
versions
Version: 1.0.0 latest
Initial release
about
The "P.R.O.O.F." or Pneumatic Rifle of Online Freedom. The first 3D printed fully automatic air gun to be made available to the general public.
P.R.O.O.F. IS AN EXPERIMENTAL AIR GUN SYSTEM THAT IS STILL UNDER DEVELOPMENT AT THE TIME OF PUBLICATION (APRIL 2022). THIS IS THE FIRST EDITION AND THE P.R.O.O.F. VARIANT WITHIN THIS PUBLICATION IS CONSIDERED THE “HPA VARIANT.” THIS VARIANT IS DESIGNED TO FUNCTION AT HIGH PRESSURE NOT GREATER THAN 850 PSI.
Developed and tested by INMC. Visit their website and purchase parts kits here: https://inmc.fun/
organization
creator
Metrics
Views
10K
Downloads
497
Project Info
release date
May 03, 2022
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
No license
version hash
QmU9w2wBJsVuP6zGihno7Sv63kShW4YT1QDTVS7uj3tBnG
files
| File | Extension |
|---|---|
| Trigger.stl | stl |
| Suppressor.stl | stl |
| Suppressor Locking Lever.stl | stl |
| Stock Locking Lever.stl | stl |
| Proof_Manual_Version_1_00.pdf | |
| Priming Gasket (Radius 2.7mm).stl | stl |
| Priming Gasket (Radius 2.775mm).stl | stl |
| Priming Gasket (Radius 2.75mm).stl | stl |
| Priming Gasket (Radius 2.725mm).stl | stl |
| Priming Gasket (Radius 2.6mm).stl | stl |
| Priming Gasket (Radius 2.675mm).stl | stl |
| Priming Gasket (Radius 2.65mm).stl | stl |
| Priming Gasket (Radius 2.5mm).stl | stl |
| Priming Gasket (Radius 2.55mm).stl | stl |
| Priming Gasket (Radius 2.4mm).stl | stl |
| Priming Gasket (Radius 2.3mm).stl | stl |
| Piston.stl | stl |
| Pistol Grip.stl | stl |
| Magazine Well.stl | stl |
| Magazine Gasket.stl | stl |
| Magazine (40) BB.stl | stl |
| Handguard.stl | stl |
| Gas Block_ low pressure.stl | stl |
| Gas Block.stl | stl |
| Gas Block Cover.stl | stl |
| Butt Stock.stl | stl |
| Buffer.stl | stl |
| Barrel Spine_no drill needed.stl | stl |
| Barrel Spine.stl | stl |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
