"Razorback" Rear Handstop: FFFTech/FFFTechnology
Inspired by Emissary Development's "Handbrake", and Magpul's Handstop Kit.
This design comes in four variants:
*Standard
*Standard, Non-Skeletonized
*Ridged
*Ridged, Non-Skeletonized
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 210C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 5
Infill: 30%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 32%
Print the handstop upside-down.
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
File | Extension |
---|---|
Razorback Rear Handstop.zip | zip |
Version: 1.0.0 latest
"Razorback" Rear Handstop: FFFTech/FFFTechnology
Inspired by Emissary Development's "Handbrake", and Magpul's Handstop Kit.
This design comes in four variants:
*Standard
*Standard, Non-Skeletonized
*Ridged
*Ridged, Non-Skeletonized
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 210C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 5
Infill: 30%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 32%
Print the handstop upside-down.
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
2.9K
403
Jul 22, 2021
United States
English
QmZtrDG7sp8FVWju3gguBiWTQUmHKkuhwVbSMeeaogdK5A
File | Extension |
---|---|
Razorback Rear Handstop.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.