River Terrors Grip (AR-15): FFFTech/FFFTechnology Another spooky grip, taken from one of my dreams a few weeks ago. "Don't cross the river at night; flesh off your legs will be gone, before you can get out..." Printer Used: Monoprice Maker Select Plus Filament Used: PLA+ Print Settings: Extruder: 218C Bed: 56C First Layer Print Height: .20mm Standard Layer Height: .14mm Wall Thickness: .40 Wall Perimeters: 4-5 Infill: 25% Infill Pattern: Gyroid Material Flow: 100% Hardware Needed: 1x Allen Head Screw, 1/4-28 x 1" 1x Steel Star Washer 1x Safety Selector Detent Pin 1x Safety Selector Detent Spring
File | Extension |
---|---|
River Terrors AR-15 Grip V1.1.zip | zip |
Version: River Terrors Grip (AR-15) V1.1 latest
River Terrors Grip (AR-15) V1.1: FFFTech/FFFTechnology
Another spooky grip, taken from one of my dreams a few weeks ago.
"Don't cross the river at night; flesh off your legs will be gone, before you can get out..."
Update V1.1: Fixed void(s) in STL mesh.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
Version: 1.0.0
River Terrors Grip (AR-15): FFFTech/FFFTechnology Another spooky grip, taken from one of my dreams a few weeks ago. "Don't cross the river at night; flesh off your legs will be gone, before you can get out..." Printer Used: Monoprice Maker Select Plus Filament Used: PLA+ Print Settings: Extruder: 218C Bed: 56C First Layer Print Height: .20mm Standard Layer Height: .14mm Wall Thickness: .40 Wall Perimeters: 4-5 Infill: 25% Infill Pattern: Gyroid Material Flow: 100% Hardware Needed: 1x Allen Head Screw, 1/4-28 x 1" 1x Steel Star Washer 1x Safety Selector Detent Pin 1x Safety Selector Detent Spring
3.1K
431
Aug 29, 2022
United States
English
File | Extension |
---|---|
River Terrors AR-15 Grip V1.1.zip | zip |
Version: River Terrors Grip (AR-15) V1.1 latest
River Terrors Grip (AR-15) V1.1: FFFTech/FFFTechnology
Another spooky grip, taken from one of my dreams a few weeks ago.
"Don't cross the river at night; flesh off your legs will be gone, before you can get out..."
Update V1.1: Fixed void(s) in STL mesh.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
Version: 1.0.0
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.