Scaffold Stick Mag (CZ Scorpion Evo): Laffs Dynamics
3D printed Scorpion Evo magazine with alternating cross patterning. Uses same internals as the Laffs Dynamics Waffle Stick Mag series.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 8+
Infill: 75%+
Support Material Percentage: 18%
Hardware Needed:
1x 30rd Scorpion Evo Mag Spring (See Notes)
Notes:
1) Aftermarket mag springs can be purchased from: https://czcustom.com/cz-parts-all/cz-springs-all/evo-mag-ext-spring.html
File | Extension |
---|---|
Scaffold Stick Mag (Scorpion Evo).zip | zip |
Version: 1.0.0 latest
initial upload
Scaffold Stick Mag (CZ Scorpion Evo): Laffs Dynamics
3D printed Scorpion Evo magazine with alternating cross patterning. Uses same internals as the Laffs Dynamics Waffle Stick Mag series.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 8+
Infill: 75%+
Support Material Percentage: 18%
Hardware Needed:
1x 30rd Scorpion Evo Mag Spring (See Notes)
Notes:
1) Aftermarket mag springs can be purchased from: https://czcustom.com/cz-parts-all/cz-springs-all/evo-mag-ext-spring.html
1.2K
206
Aug 03, 2023
CAD Object, Stereolithic object, CAD Collection
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
Scaffold Stick Mag (Scorpion Evo).zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.