Scorpion Evo "Stinger" Grips: FFFTech/FFFTechnology

A set of full sized grips created for the AWCY? Scz0rpion and OEM CZ Scorpion Evo 3.

The grip (excluding the top mounting portion) has a length of ~107mm, and a thickness of 24.3mm.

Grip Variations:

* Standard; no texture.

* Ridged; Anti-Slip texture down the front of the design.

* Ergo; Rounded finger grooves on the front of the grip.

Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 218C
Bed: 54C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%

Print the grip upside-down.

Hardware Required:

1x M4x30mm Bolt

1x M4 Hex Nut

Accreditation:

* Justinhates: For test fitting the Standard Grip, and providing images.

* Yeetshirtninja: For test fitting the Ergo Grip, and providing images.

* Insertmeow: Original designer of the CZ Sczorpion MOE Grips, which this design uses the top portion of his grip model.