Sentinel Grip Rev 1: Laffs Dynamics
A revision of the original Sentinel Grip. Designed for larger hands, with a steeper grip angle.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 38%+
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
File | Extension |
---|---|
Sentinel Grip Rev 1.zip | zip |
Version: 1.0.0 latest
initial upload
Sentinel Grip Rev 1: Laffs Dynamics
A revision of the original Sentinel Grip. Designed for larger hands, with a steeper grip angle.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 38%+
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
1.4K
215
May 31, 2023
United States
English
No license
File | Extension |
---|---|
Sentinel Grip Rev 1.zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.