Skorpion vz61 Lower Receiver v5
about
This is the VZ-61 V5 pistol by Brute.
Changelog - Update 4/22/2014
-Increased OAL between takedown pin hole and buffer tower .014 in
-tightened magwell length to proper spec
-adjusted mag release button diameter and slot
-adjusted bolt hold open hole diameter and made cut for clearance on bottom
-adjusted fcg hole diameter
-increased material behind ejector to improve strength
-added fillets inside fcg pocket to improve strength
-increase pistol grip hole size
-adjusted pistol grip slot for more clearance towards front
-added stock clearance cut and retainer hole
-added clearance for stock when open
-added clearance cut for fcg pin to sit flush
-added two 'lightening' on sides of magwell as well as buffer tower rear for cosmetics
files
| File | Extension |
|---|---|
| skorpion_vz61-v5.stl | stl |
| skorpion_vz61-v5.step | step |
| skorpion_vz61-v5.sldprt | sldprt |
| README.md | md |
versions
Version: 1.0.0 latest
initial upload
about
This is the VZ-61 V5 pistol by Brute.
Changelog - Update 4/22/2014
-Increased OAL between takedown pin hole and buffer tower .014 in
-tightened magwell length to proper spec
-adjusted mag release button diameter and slot
-adjusted bolt hold open hole diameter and made cut for clearance on bottom
-adjusted fcg hole diameter
-increased material behind ejector to improve strength
-added fillets inside fcg pocket to improve strength
-increase pistol grip hole size
-adjusted pistol grip slot for more clearance towards front
-added stock clearance cut and retainer hole
-added clearance for stock when open
-added clearance cut for fcg pin to sit flush
-added two 'lightening' on sides of magwell as well as buffer tower rear for cosmetics
creator
Metrics
Views
2.2K
Downloads
163
Project Info
release date
Sep 15, 2023
artifact type
library category
fabrication methods
Primarily Printable, Hybrid, Printable Lower / Frame
fabrication tool
3D Printer
license
No license
files
| File | Extension |
|---|---|
| skorpion_vz61-v5.stl | stl |
| skorpion_vz61-v5.step | step |
| skorpion_vz61-v5.sldprt | sldprt |
| README.md | md |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
