Socommish Polymer80 G19
about
This is the Socommish19, meant to look similar to the MK23 Socom, Front end has a little extra weight added with all the filament.
So, you need much less effort to maintain control during recoil, muzzle rise, and stay on target. Pew Pew Pew...
Comes with a Matching Magholster. You can purchase a quick clip and 1/8inch Chicago Screws to finish the magazine holster.
Uses Polymer80 G19 rails.
files
| File | Extension |
|---|---|
| Socommish19wMagHolster.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
This is the Socommish19, meant to look similar to the MK23 Socom, Front end has a little extra weight added with all the filament.
So, you need much less effort to maintain control during recoil, muzzle rise, and stay on target. Pew Pew Pew...
Comes with a Matching Magholster. You can purchase a quick clip and 1/8inch Chicago Screws to finish the magazine holster.
Uses Polymer80 G19 rails.
creator
Metrics
Views
1.7K
Downloads
126
Project Info
release date
May 30, 2022
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
No license
version hash
QmYVS3HPSunmkdPU6MGj8hEy1ugiyoMnDzDfobi9yuYzTX
files
| File | Extension |
|---|---|
| Socommish19wMagHolster.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
